Pages

Wednesday, August 13, 2014

Our Next Adventure, Planning Edition

To the faithful who still follow our currently boring blog; I say Greetings!

To the new readers who have just stumbled here from the vast depths of the internet; Welcome to the great intermission between adventures.

It has been several months since we sold Chuck, it was sad to see him go, but we must continue; spurred ever onward by the relentless and dogged flow of time.

NEWS!

We have found Chuck's replacement!  The as-of-yet unnamed van is a 2004 Dodge Sprinter, here are the vitals.

Origin: Manufactured by Mercedes-Benz in Germany in late 2003

Drivetrain: 2.7L Inline-5 CDI (Common Rail Direct Injected) Turbo-Diesel | 154HP and 243lb-ft |  ULSD and LSD fuels | 5-speed automatic transmission

Body: Arctic White | 140" wheelbase | super high roof (72" interior hegiht) | 5 doors

Equipment: Base Cargo | A/C | Manual locks and windows | 2 seats | rubber and plywood floors

Condition: Good | 105,000 miles | fleet maintained | a few dents and scratches

We flew to Orlando Florida to pick it up and drove back to Tulsa over 2 days.  Besides some comfort issues the trip was uneventful (except for a bit of drama at the outset).

When we were first inspecting the van, I noticed that the turbo resonator was completely split!  This is a common failure point which results in low power and/or limp home mode (LHM).  Thankfully I had a roll of duct tape and the 2 tools required to change this part.

After applying a copious amount of 3M industrial duck-tape the van was mobile once more.

The resonator as we found it.

Some dirty hands for scale.


3M High Temp adhesive tape (great stuff!).

A really hot abandoned Florida parking lot.

We then proceeded to drive the van to a Freightliner dealer who had the part in stock!

mmmmmm fresh....


Then it was off to Walmart for a open space to park and swap.  Two bolts, a box of baby wipes, a well burned back and several clamps later, we were ready to roll!  Only a couple hours later than desired.  Not a bad delay all things considered.

Did I mention hot parking lots?

And we're off!

The rest of the drive was about 21 hours of uneventful-ness.  Although figuring out the climate control system was a bit of a challenge.  Something about European cars maybe?

We have been daily driving this van for several weeks now, and no issues to report (except really cold A/C). The plan as it sits, is to finish up some maintenance items, and a few minor fixes.  Then we will set upon doing upgrades.  Air suspension seats, cruise control, and power locks are at the top of the list.

Then, let the up-fitting commence!  Just thinking about the epic pile of hardware we will need is making me drool...  The final product will be something like Chuck, but so much more.  Giving a couple of engineers a blank slate, is a very bad idea (especially for the budget).  I hope to keep a somewhat detailed log of our build out progress.  The conversion clock is ticking, with approximately 18 months to completion, its going to be tight.

Until next time; make your plans big and keep your ideas grand.


3 comments:

  1. Okay you people, I am totally fascinated and I've been reading through things that I do not even remotely understand, and I have arrived at the conclusion that you guys are so cool. Your van is cool and the tools are cool and the knowing how to do these things is cool. This is all so cool. Also hello.

    ReplyDelete
    Replies
    1. Well, if it is any consolation, I started off knowing very little about most of the stuff as well. Now, I am a genuine handywoman!

      Delete
  2. Okay you people, I am totally fascinated and I've been reading through things that I do not even remotely understand, and I have arrived at the conclusion that you guys are so cool. Your van is cool and the tools are cool and the knowing how to do these things is cool. This is all so cool. Also hello.

    ReplyDelete