Thursday, January 21, 2016

Winter Update #5

I received the lights and the mounting channels/diffusers arrived from Hong Kong. We decided on neutral white for the interior lighting. Some links below. The flush mount square lights use 3.1W each, and make 185 lumens.

http://amzn.to/1ODw8FS
http://amzn.to/1ODwe0a
http://amzn.to/1ODweNy
http://amzn.to/1ODwfkw

We are using a Blue Sea dimmer to control the lights. A really useful feature of this unit is the ability to connect multiple control switches in parallel.

http://amzn.to/1VxojB0










The welding on the bed supports has been completed and they have been painted. Rubber has been bonded to the bed frame to eliminate rattles.








The 2 mistake cabinets have been mounted over the bed. The lengths worked, so no additional modifications were necessary!  (We have to get lucky sometime right?) Some photos show how I mount the cabinets to the van body. I used ¼-20 rivnuts and 90 degree brackets. When 2 cabinets meet they are connected with ¼-20 bolts and T-nuts.







The wiring for accessory outlets and task lighting is coming slowly. There is substantial vibration proofing needed for plumbing and wire harnesses prior to closing up the cabinets.



Here are the USB and 12V outlets I am installing. I have read some reports that the USB outlet may not have the correct wiring pin out to enable high speed charging in some devices. I need to take one apart to confirm if the pin-out needs modified for optimal charging.

http://amzn.to/1VxpTTq

http://amzn.to/1Vxq1lU


Wall covering is on order, should be able to start covering wall panels when the weather warms. The cabinetry is mostly done at this point. All that is needed is hardware and painting.


Edit: I checked the Espar Fuel Pickup today. NO LEAKS!!!!

1 comment:

  1. Thank you for your valuable updates and pictures. Very educational and appreciated.

    ReplyDelete